Hey, have you ever seen the staff at the security checkpoint groping around the display screen but unable to find the switch? This is really not surprising! Today I will show you how to use the LED screen control card of the security inspection machine.

The secret of where the control card is hidden is revealed

​​First question: Where is this thing hidden? ​ ​
The control cards of 90% of security screens are hidden in three places:

1. ​​Access compartment on the back of the screen​ ​: In a metal box with a lock, usually near the power socket
2. ​​Below the side cooling holes​ ​: A thumb-sized groove that requires special tools to open
3. ​​Control cabinet at the bottom of the column​ ​: Integrated in the equipment master control system, requires permission card to unlock

I saw a real case last week: in a newly installed security screen at an airport, the control card was actually hidden in the mezzanine of the side panel of the conveyor belt! This unconventional design may not even be written in the manual.

Selection and pit avoidance guide

​​Important parameter comparison table​​

​​3 details that must be checked:​​

• Look at the thickness of the heat sink: 1.5mm aluminum substrate is the bottom line
• Touch wire hardness: High-quality silicone wire can be bent continuously 30 times
• Measured voltage fluctuation: qualified within ±5%

Maintenance tips

​​Three rules of life extension:​​

1. Use a brush to clean the interface dust every month (never use alcohol! )
2. During thunderstorms, turn on the phone for 20 minutes every day to remove moisture.
3. Tighten cable connectors every quarter

One logistics center suffered a loss - oxidation of the control card interface resulted in blurred screens, which delayed the entire sorting line. Now they have rules:​ ​Do moisture-proof testing every week during the rainy season​​。

Talking from personal experience

The smartest design I’ve ever seen is​ ​Dual control card hot backup system​ ​, the main card automatically switches to the backup card when it fails, and the whole process takes less than 0.3 seconds. This solution is especially suitable for places such as hospitals and customs that cannot shut down the machine.

Some new models now support​ ​remote diagnosis​ ​, technicians can troubleshoot problems halfway around the world. But you should pay attention to the compatibility of the communication protocol. Don't buy it and find that it is "the same as ducks" with the existing system.

After all, choosing a control card is not about choosing a mobile phone - beautiful parameters are not as good as durability. After all, security inspection equipment needs to run 24 hours a day, 7 days a week.​ ​Stability is the last word​​！

for more product information and pricing, please contact us .