Lao Zhang, who is on duty at the shopping mall, has been driven crazy by complaint calls recently - every time he switches the expansion mode of the advertising screens throughout the building, there are always a few screens that go on strike with dark faces. This kind of trouble has actually been foreshadowed for a long time. Today I will reveal the hidden operations that are never written in the equipment manual.

​​1. Signal source selection has hidden dangers​​
Newbies are most likely to get stuck in the first step:

• ​​HDMI priority trap​ ​: 90% of flickering screens are caused by multiple signal sources being online at the same time.
• ​​Correct steps​ ​: Turn off the backup signal first → long press the menu button for 5 seconds → select​ ​Master signal lock mode​​
• ​​fatal error​ ​: Switch directly with the remote control (will trigger signal competition)

Last year, a supermarket chain suffered a loss: 18 screens collectively went black. After checking for three days, it was discovered that the attendant had plugged in HDMI and DP cables at the same time. Nowadays, high-end equipment comes with​ ​Intelligent signal arbitration function​ ​, but older models still rely on manual intervention.

​​2. Death Cross of Resolution Setting​​
Take a look at this comparison table of blood and tears:

Here’s a little trivia: Professional-grade equipment support​ ​Pixel level mapping​ ​, can accurately avoid the screen seams of the Windows taskbar. During the live broadcast of an international event, the director relied on this function to fix the score bar directly in front of the podium.

​​3. Legal risks behind the refresh rate​​
Don’t think that just by raising the parameters, everything will be over. These red lines cannot be touched:

1. Outdoor screens are strictly prohibited from exceeding​ ​7500cd/m²​ ​(will trigger light pollution complaints)
2. Stage screen must be locked​ ​1920Hz refresh rate​ ​(Camera shooting without flicker)
3. Disable extended mode for medical screens (will interfere with ECG waveform display)

Last year, a hospital switched the consultation screen to extended mode, and as a result, three monitors collectively reported errors. Industry regulations now clearly require:​ ​Life support scenarios require hardware isolation of video signals​​。

The editor has personally seen the wildest operation: an electrician used bolt cutters to forcefully switch signals, and as a result, the entire control circuit was burned. To be honest, now I have all the equipment​ ​Smart switching protocol​ ​, press and hold "menu+confirm key" for 10 seconds to enter the engineering mode. But don’t make random adjustments - the last time someone adjusted the language mode to Swahili, it cost 8,000 yuan just to restore the factory settings.

for more product information and pricing, please contact us .