///dividing line///
Last month, while helping a friend repair a store advertising screen, he squatted behind the machine and started sweating: "Where is this socket hidden?" "In fact, finding the display socket is like playing an escape room. The key is to understand the design rules. Last year, a shopping mall installation team spent two hours looking for the interface, and finally found it hidden on the side of the heat dissipation hole - this was enough for them to be laughed at by their peers for three years.

///dividing line///
​​Common hiding spots revealed​​
• ​​Bottom groove protective layer​ ​: 80% of outdoor screens have the interface hidden under the waterproof cover, and you have to use your fingernails to open it.
• ​​Modular seams​ ​: Rental screens often design the socket into a buckle structure, which pops up when pushed.
• ​​Inside the radiator grille​ ​: In order to save space on the ultra-thin screen, the interface area will share space with the heat dissipation channel.
A stage designer told me that one time when he had to dismantle the screen in an emergency, he couldn't find the socket. Later he found that he needed to use​ ​Magnetic tools​ ​It will pop up only when you click on a specific position. Nowadays, new models are marked with hidden markings. If you shine a flashlight at an angle, you can see the arrow marks.

///dividing line///
​​Interface type comparison table​​
Let me give you the record book of my repair shop for your reference:

Special note: encountered​ ​Hexagonal nested interface​ ​Don't plug it in hard, it's a dedicated port designed for integrated signal and power supply. If you plug it in wrongly, the motherboard will be burned.

///dividing line///
​​Guidelines for dealing with difficult situations​​
• ​​The interface is rusty​ ​: After spraying WD-40 and other rust removers, blow with a hot air gun at 60℃ for 30 seconds before pulling out.
• ​​Broken buckle​ ​: Find a paper clip, bend it straight, and insert it through the emergency hole to trigger the unlocking mechanism.
• ​​Logo wear​ ​: Check the wire color ring - the black wire corresponds to the power port, and the blue wire connects to the signal port
The most difficult case we handled last month: the seafood market display screen was corroded by salt spray, and 8 of the 12 interfaces were welded shut. Used later​ ​Ultrasonic cleaning machine​ ​It took half an hour to save it. This lesson tells us that when installing a screen at the beach, we must choose a gold-plated interface.

///dividing line///
Next time you encounter a missing display interface, remember to circle the device three times. Don’t panic if you really can’t find it. Those with​ ​24-hour technical response​ ​Manufacturer, remote video guidance is ten times more effective than reading instructions. After all, professional things need to be done by professionals, right?

for more product information and pricing, please contact us .