I was confused as soon as I received the new device? Last month, a brother from the engineering department of the mall complained to me and looked for the USB port in front of the three-meter-high LED screen, and climbed the ladder for half an hour. Today I will take you to solve this seemingly simple problem but actually hidden mystery!

​​#Three major hiding points for physical location​​
Don't rush to unbox it! First understand the equipment structure rules. Common locations are:

1. Control card side groove (accounts for 67% of models)
2. Adjacent area of ​​the power module (with dust cover design)
3. Seam of splicing unit (protective frame needs to be removed)

I have a cold knowledge: the outdoor screen with IP65 protection level must be hidden behind the double-layer waterproof glue pad. Last time I installed a screen for a music festival, I inserted a USB flash drive in the rainstorm and didn’t get into the water. It was this design.

​​#Four-step signal recognition troubleshooting method​​
Have you ever encountered any unresponsiveness in the plug? Don't suspect that the device is broken, follow this procedure:
① Check out the control software version (produced after 2020 to support USB3.0)
② Check file format (FAT32 best compatibility)
③ Confirm the power supply stability (voltage fluctuations exceed 5% will be disconnected)
④ Try to replace the data cable (the diameter of the copper core ≥0.12mm is best)

Let me tell you the truth - the large screen at a certain exhibition last year was black, and I finally found that it was a low-quality line of free shipping for 9.9 yuan. Remember, you must use a dedicated cable with a shielding ring to transmit 4K materials!

​​#Secret technology for expanding function development​​
Do you think USB port can only transmit files? Too wasteful! Advanced gameplay includes:
√ Firmware upgrade (upgrade 15% refresh rate)
√ External sensor (automatic adjustment of brightness in temperature and humidity)
√ Multi-screen synchronization control (save 50% debugging time)

The most amazing case I have ever seen is that it is converted into an emergency charging station. When the shopping mall is powered off, it relies on a large-screen USB port to power the security equipment. However, it should be reminded that the continuous output power should not exceed 5V/2A, otherwise the module will be damaged by burning.

​​#Maintenance taboo list​​
These operations destroy the interface in minutes:
× Hot plugging is not safely popped up (data loss rate is increased by 80%)
× Use dust plugs without covering in open air during rainy season (oxidation probability × 3 times)
× Wipe directly with alcohol cotton pads (corrode gold-plated contacts)

It is recommended to do contact maintenance every quarter. Spray the contact resurrectant bought by the hardware store twice, which saves 200 yuan compared to replacing the new module. If you find that the plugging and unplugging feels stuck, stop using it quickly, and it will probably be deformed!

Recently, a new trend has emerged in the industry - wireless transmission modules are gradually replacing physical interfaces. However, actual measurements have found that the delay of wireless transmission of 4K video within 50 meters is still 18ms higher than that of wired. I have to say that in the next five years, USB ports will still be in urgent need, especially engineering scenarios that require real-time debugging.

for more product information and pricing, please contact us .