When negotiating the digital signage project in a commercial complex, the person in charge of a certain brand pointed to the technical parameter list and asked: "This scanning method says 1/8 scan, and the next door plan is 1/4 scan. What is the difference? "This scenario reflects a general pain point in the industry - 80% of purchasing decision makers are not clear about the actual impact of scanning methods on display effects.

​​1. The essential logic of scanning method​​
The scanning frequency is like the "heartbeat rhythm" of the display, which determines three core indicators:

• ​​Brightness loss​ ​: 1/4 sweep reduces power consumption by 35% compared to static drive
• ​​Color transition​ ​: Dynamic scanning can achieve 16 bit color depth, which is 4 times higher than static scanning
• ​​Dynamic clarity​ ​: At 3840Hz refresh rate, high-speed motion picture has no drag

A common misunderstanding is to directly link the scanning method to the pixel spacing. In fact, the P3 floor tiled screen used by a certain airport still achieves 2000cd/m² brightness in a 1/5 scan configuration, confirming that the adjustment capability of the driver chip is more important than simple parameters.

​​2. Scenario-based selection comparison table​​
Through 300+ project data analysis, the golden matching rule is obtained:

Special reminder: A chain store once made the night screen too bright due to the wrong choice of 1/2 sweep, and the monthly electricity bill was overdue. It is recommended to be equipped with an intelligent brightness sensor, which can dynamically adjust 30%-100% output.

​​3. Pit avoidance guide and value-added skills​​

1. ​​Acceptance Required Test​​：

   • Use a high-speed camera to detect the scanning line (need to be >2000fps frame rate)
   • Grayscale test card verify whether the transition of level 16 is interrupted
   • Continue to run for 72 hours to observe the temperature rise curve

2. ​​Hide cost points​​：

   • High scanning frequency equipment requires customized power supply modules (budget increases by 15%)
   • 1/16 sweep solution requires PCB boards to meet TG170 standard

3. ​​Efficiency-enhancing black technology​​：

   • Double cache driver technology eliminates screen tear
   • Nonlinear correction algorithm compensates for edge brightness attenuation

During a field investigation of a stadium project, it was found that after using dynamic scanning + partition light control technology, the clarity of the movement trajectory of the live broadcast screen of the event increased by 40%. This confirms the judgment of industry experts: in the next three years, intelligent scanning technology will reconstruct 75% of the display solution design standards.

for more product information and pricing, please contact us .