Have you ever seen a stage where fireworks can be effected? Last month, a friend’s bar opened and spent 80,000 yuan to install an LED floor tiled screen. As a result, three customers were tripped by a broken wire on the day of opening. The boss was so angry that he slapped his thigh: "Didn't this thing hold a load of 500 kilograms?" "In fact, choosing LED floor tiles is much more complicated than choosing ceramic tiles. Today, let’s break it up and talk about the ways here.

1. Three must-see for beginners when looking for manufacturers

Let’s pour cold water on you first - seven out of ten manufacturers that can make floor tiles and screens are all private labels! Last year, an industry random inspection found that 38% of the so-called "producers" did not even have basic welding workshops. Teach you a ruthless trick:​ ​Require video factory inspection​​, focus on three points:

1. Is there an automated patch machine (the failure rate of manual welding is 3 times higher)
2. Is the test workshop really doing an aging experiment (requires 72 hours of continuous playback record)
3. Is the box structure integral die-casting (split box quasi-deformed for half a year)

​​Three-piece sets to find a manufacturer:​​

• Wear a load-bearing test report (don't make a verbal promise)
• Check whether the protection level starts with IP65 (splash protection is just the basis)
• Must provide a warranty of more than three years (separate warranty of modules, power supplies, and control systems)

Let me tell you a real story: the floor tiled screen in a shopping mall atrium was opened three days after it was opened. When I disassembled it, I found that it was the same power module as the mobile phone charger...

2. Self-question and self-answer: Three questions about the soul of floor tiles screens

​​Q: Will you get electrocuted if you step on it? ​ ​
A good question! Qualified floor tiles screens need to be passed​ ​3000V voltage withstand test​​, but many small factories cut corners. I will teach you a local method: take a pen and walk around the edge of the screen during debugging. If the electricity is leaking, return the product as soon as possible.

​​Q: Can I wear high heels directly? ​ ​
Depend on the situation! The surface hardness of ordinary floor tiles screens is 6H (harder than mobile phone screens), but​ ​Slim heels high heels​​The pressure can reach 200kg/cm², and it is recommended to lay 5mm thick tempered glass. At a certain auto show last year, an embarrassing incident occurred when a model's heel penetrated the screen.

​​Q: Can it be used outdoors on rainy days? ​ ​
Don't! Although it is marked with IP65 protection, the most fear of continuous water accumulation at the joints of floor tiles and screens. If you really want to use it outdoors, you have to choose​ ​IP68 diving grade + drainage tank design​​The model is 40% more expensive but can extend its life span for five years.

3. Guide to prevent pits in the text game in the parameters

Do you think everything will be fine if you understand the parameter table? There are many tricks here:

• ​​"Refresh rate 3840Hz"​​: It may be a peak rather than a persistent value
• ​​"Load bearing 2000kg/㎡"​​: In fact, it is static load-bearing, and dynamic impact can only bear one-third
• ​​"100,000 hours of life"​​: It refers to the life of the lamp bead, and the power module usually lasts 30,000 hours.

Focus on these three real parameters:

1. ​​Pixel runaway rate <0.0001​​(The four decimal places must not be missing)
2. ​​Brightness uniformity ≥97%​​(Prevent light and dark patches)
3. ​​Response time ≤2ms​​(Fast moving screen without dragging)

Remember to let the manufacturer out​​Third-party testing report​​, preferably SGS or TUV certified. Last year, when the running screen was played in the gym's floor tiles screen, the delay was 0.5 seconds, and the member almost fell into a pile of arhats...

4. Details of the installation site

Even if you buy a good screen, you will still turn over if you don’t install it properly. These details must be watched to death:

• Ground flatness error ≤3mm/m² (test with laser level)
• The power supply line must be routed separately (don't share the circuit with the light)
• Leave enough heat dissipation space of 10cm (especially floor heating room)
• Apply two layers of waterproof glue at the joints (the inner layer of silicone and outer layer of polyurethane)

Lessons from blood and tears: A hot pot restaurant installed floor tiles on the vegetable outlet, but steam penetrated through the joints and repaired the control card five times in three months.

The editor said something heart-wrenching: If you don’t do it, you can find a powerful manufacturer if you want to do it. Don’t look at the price of a small workshop 30% cheaper, the later maintenance fee can make you doubt your life. Some manufacturers now make it​ ​Modular quick disassembly design​​, wherever it breaks, it is quite suitable for bosses who are afraid of trouble. Next time you see the glowing ground in the mall, you will know whether you should step on it!

for more product information and pricing, please contact us .