Are newbies who are new to LED electronic screens often confused by the parameter list? I obviously wanted to buy a display screen for a conference room, but the merchants recommended parameters for outdoor advertising screens. Today we will break it apart and chat about it,​ ​Where is the doorway in the model hidden?​​。

​​1. Full analysis of model password​​
Don’t panic when you see the letter-number combinations P3 and P4. This is actually​ ​Point spacing (unit mm)​ ​. For example, P3 represents the lamp bead spacing of 3mm. The smaller the number, the more delicate the picture will be. But don’t rush to pursue small spacing - P1.5 screens used in conference rooms are 2.8 times more expensive per square meter than P3.

▼ Golden formula for selection:

• ​​Viewing distance (meters) ≈ point spacing value × 3​​
  (Example: 5-meter appearance selection P1.6-P2.5)
• ​​Screen size = display area ÷ dot spacing square​​
  (P2’s 10㎡ screen actually requires 10,000/(2²)=2,500 modules)

​​2. Hidden money-burning traps​​
A customer spent 180,000 to buy a P2.5 outdoor screen, but color patches appeared in half a year - the problem lies in​ ​Refresh rate is less than 1920Hz​ ​, the screen smearing is serious when exposed to direct sunlight. Now high-end products can achieve 3840Hz, and the smoothness of dynamic images is increased by 40%.

▼ Must-check three-piece set:

1. ​​Smart brightness adjustment​ ​(Indoor 800-1200cd/m² dynamically matches ambient light)
2. ​​Protection level​ ​(Outdoors must be at least IP65 resistant to heavy rain, and sports venues must be impact resistant)
3. ​​Grayscale​ ​(Only 10bit or above can display 16.77 million colors)

​​3. Matching the scene​​
Last week, a milk tea chain store owner stepped into a trap - he installed ordinary indoor screens in a humid southern shopping mall, and the damage rate of the lamp beads exceeded 5‰ in three months. actually​ ​Special scenarios depend on additional functions​​：

• Catering shops: choose poster screens with anti-oil coating
• Stage floor tile screen: The surface should be tempered glass + anti-slip treatment
• Transparent display window: Transparency rate ≥85% will not block the products

​​4. Guide to purchasing pit prevention​​
Don't believe the nonsense about "parameters can be marked casually"! Teach you three ways to inspect goods:

1. Use a mobile phone to shoot in slow motion and eliminate any flickers immediately.
2. Use A4 paper to measure the seams. Do not accept any seams exceeding 1.5mm.
3. It is required to play the 4K test film on site, and the pass has noise in the dark parts.

A customer saved RMB 30,000 in purchasing fees last year, but ended up paying RMB 50,000 in maintenance fees.——​ ​The contract must state that the lamp beads are guaranteed for 3 years​ ​, the whole machine will be provided with door-to-door service for at least 2 years.

The current annual growth rate of the global LED screen market is 13.7%, but the return rate in Southeast Asia is as high as 12%, mainly due to temperature and humidity adaptability. Next time you see something advertised as "all-climate suitable", remember to ask for a third-party environmental test report.

for more product information and pricing, please contact us .