I passed by a newly built smart public toilet in the city center two days ago and found an electronic screen hanging on the wall that displays the status of the toilet seat. When I took a closer look - my dear, the lower half of the screen was covered in snowflake patterns! This reminds me of a problem faced by many property managers: "How do novices quickly gain fans?" The renovation of public toilets requires the installation of LED screens, but there are always pitfalls? "Today we will talk about how to choose this device that seems simple but actually has hidden secrets.

​​First figure out what problem you want to solve​ ​. Last year, the LED screen installed in a public toilet in a scenic spot showed green spots after three months of use because water vapor erosion was not considered. So you have to make a list first:
• Is it to be installed indoors or in a semi-open-air environment?
• Do you need to display text information or dynamic navigation?
• Does it run more than 12 hours a day?

For example, public toilet screens in highway service areas must be able to withstand temperature differences from -20°C to 60°C, while those in shopping malls may place more emphasis on the anti-accidental touch function. There is a particularly typical case: the public toilet screen in the seaside park was corroded by salt spray, and it took three suppliers to find a model with nano-coating.

​​Hardware parameters are more important than appearance​ ​. In 2023, the industry upgraded the IP66 protection standard, but many merchants are still using the old IP54 to pass it off as new products. Focus on these data:
▶ Brightness of at least 4000 nits (can be seen clearly under the bright sun)
▶ Refresh rate ≥1920Hz (to prevent dynamic digital smearing)
▶ The heat dissipation structure should be designed with rain gutters (to prevent condensation water from flowing into the circuit)

Last year, a supermarket chain purchased 500 toilet seat indicator screens because they failed to pay attention to the operating temperature range. All the screens in northern stores went black in winter.

​​Procurement channels are very particular​ ​. There are three main ways now:

1. E-commerce platform procurement (suitable for small batches, but you need to take an unboxing video)
2. Find an engineering contractor to package it (save worry but easily increase the price)
3. Directly connect with manufacturers (there is a factory in Shenzhen with a monthly output of 10,000 square meters, and the explosion-proof screens made for overseas can withstand high-pressure water gun cleaning)

There is a cultural tourism project that is particularly clever: they require suppliers to write in the contract that "the screen will not go black when the phone is turned on for 30 consecutive days during the rainy season." As a result, reliable manufacturers have been selected. This kind of practical experience is much more useful than reading a brochure.

​​There are so many pitfalls in installation and maintenance that it’s ridiculous​ ​. Last month, a public toilet screen installed in a community was not protected against reverse connection. The cleaning lady plugged it into the wrong power supply and burned the main board. Must note:
• The reserved access hole size is 15cm larger than the screen
• The power supply must have a leakage protection device
• Wipe with neutral detergent every week (84 disinfectant will corrode the panel)

The most unique solution is an airport's solution - they installed an intelligent sterilization module behind the screen, which can not only maintain the equipment but also purify the air. This innovative idea is worth learning from.

​​Have a good idea of ​​the price range​ ​. The reasonable price for an ordinary text prompt screen of about 1 square meter is between 8,000-15,000 yuan. But be wary:
✔️ Does it include three years of on-site maintenance?
✔️ Can the control system be upgraded remotely?
✔️ Is the power module of military grade quality?

When comparing prices, a property company found that house A's price was 30% cheaper than house B's. It turned out that they used second-hand lamp beads, and the light decay exceeded 35% in half a year. The maintenance cost was actually higher.

​​Software system is the soul​ ​. High-end models now support:
▶ Intelligent estimation of remaining toilet spaces (predicted based on the flow of people)
▶ Disinfection countdown dynamic display
▶ Automatically switch to warning screen in emergency situations

The public toilet screen in the inpatient department of a tertiary hospital suffered a big loss - the screen it purchased did not support multi-language switching, and foreign patients could not understand the prompt information at all.

Editor's opinion: Choosing a public toilet LED screen is like finding a partner to live with. You can't just look at the gift (price), but the key is whether it will hurt people (after-sales service). It is recommended to give priority to those manufacturers that dare to provide a five-year warranty and can produce real environment test reports. Recently I heard that a manufacturer has launched a "lifetime screen replacement" service. This kind of confidence is the last word. Remember, a good screen will save you ten years of worry, but a bad screen will cause you worry every day!

for more product information and pricing, please contact us .